Foundation 3D Forums

Foundation 3D Forums (http://www.foundation3d.com/forums/index.php)
-   Works in Progress (http://www.foundation3d.com/forums/forumdisplay.php?f=106)
-   -   Kirk Pike Discovery (http://www.foundation3d.com/forums/showthread.php?t=21774)

ronaldheld 15th Aug 2018 05:06 AM

Kirk Pike Discovery
 
1 Attachment(s)
MY goal is a still or short movie based on the end of the last episode in Season one of DSC. I will be starting with Chris Kuhn's version and modifying it. I will need help as I have not modeled in about 10 years, and LW 2018 is different from LW 9 and 10.

ronaldheld 30th Aug 2018 05:21 AM

1 Attachment(s)
been away from home, and I could not run LW 2018. Making some minor changes to see how it looks. Still tempted to replace the struts and nacelles.

ronaldheld 12th Sep 2018 06:38 AM

How do I take a tapered cylinder(nacelle) and remove the tapering?

Rigel 14th Sep 2018 08:10 AM

There is a tool which allows you to select points (I think) and then you can resize them according to the local normal. It's been almost 2 years since I was in Lightwave so I can't remember it exactly. It would be on the transformation menu. I thing that's what you want.

ronaldheld 19th Sep 2018 08:30 AM

Sorry for the delay, Rigel. I have problems connecting to this site.
I will check that menu when I am home.

ronaldheld 4th Oct 2018 05:17 AM

Not very satisfied on the nacelle changes.. Any opinions on if I just should replace the struts and nacelles by the TOS ones?

ronaldheld 5th Nov 2018 06:52 AM

1 Attachment(s)
switched to the newer model by Marc Bell. Will need to adjust the lighting before starting.

ronaldheld 19th Nov 2018 05:33 AM

Quote:

Originally Posted by ronaldheld (Post 331728)
switched to the newer model by Marc Bell. Will need to adjust the lighting before starting.

Not a lighting problem, but the Disco surfaces are mostly principled BSDF. Might have to revert to standard to get it to look the way I want. Opinions?

ronaldheld 18th Dec 2018 01:16 PM

1 Attachment(s)
NO real time for LW. problems with the new texturing so I mostly went back to standard. No done yet,


All times are GMT -6. The time now is 01:13 PM.


2006 - 2013 Foundation 3D