Foundation 3D

digitalillusion · 23rd November 2011, 02:07 AM

Cамоходно-Aртиллерийская Установка ИСУ-152 (1944)
or Soviet fully enclosed Armored Self-Propelled Gun ISU-152

Meurig · 23rd November 2011, 03:16 AM

Looks good so far. Do you have any reference pics of what the real thing looks like?

digitalillusion · 23rd November 2011, 03:49 AM

Thx.
Yes, I do have one's
But be careful in comparing because it has served in the armies of the world to the 60s of the 20th century

Starbase1 · 23rd November 2011, 09:24 AM

Another detail loving military modeller I see!

Great work so far!

digitalillusion · 17th December 2011, 03:05 PM

Small update.

Rigel · 17th December 2011, 05:03 PM

That looks great.

BillS · 17th December 2011, 08:20 PM

Holy detailicious batman!

DELTA · 17th December 2011, 11:25 PM

Watching this one...

JackN · 18th December 2011, 08:08 AM

Another entry for the Welds and Dimples category!

3D_CG · 19th December 2011, 10:47 AM

Quote:

Originally Posted by JackN

Another entry for the Welds and Dimples category!

ditto
how did u do the welds??

digitalillusion · 20th December 2011, 02:16 PM

Thx m8.
That's a noise mostly.
And a few is meshes.

digitalillusion · 20th January 2012, 02:23 PM

A face of...

3D_CG · 20th January 2012, 02:41 PM

wow....

How did u do the welds. impressive..

nice gun dude....

JimCrafton · 20th January 2012, 08:47 PM

Please tell me you modeled all those welds

Looks great!

digitalillusion · 25th January 2012, 07:39 AM

Thx m8.
2 of welds are meshes (near an exhausts).
The rest of them are noise.

digitalillusion · 15th April 2012, 12:56 PM

The End of modeling.

Rigel · 15th April 2012, 05:04 PM

Very nice. It has spec, which doesn't happen with military paint (at least, not the paint the Canadian Armed Forces uses). But it is a very superb model.

Bishop · 15th April 2012, 10:13 PM

Quote:

Originally Posted by Rigel

Very nice. It has spec, which doesn't happen with military paint (at least, not the paint the Canadian Armed Forces uses). But it is a very superb model.

It does when you rub it down with a little bit of diesel for an inspection. Of course then you get almost insta-dirty as soon as you start rolling again, so then you have to clean the vehicle again, and then rub it down with a little more diesel so it's clean and shiny again, so it gets dirty as soon ...

etc.

23rd November 2011, 02:07 AM	#1
digitalillusion Registered Member Join Date: Feb 2011 Location: Poland Posts: 18	Military - ИСУ-152 Cамоходно-Aртиллерийская Установка ИСУ-152 (1944) or Soviet fully enclosed Armored Self-Propelled Gun ISU-152 Attached Thumbnails
	__________________ Problem Exists Between Keyboard And Chair

23rd November 2011, 03:16 AM	#2
Meurig Moderator Join Date: Nov 2007 Location: London, UK Posts: 4,550	Looks good so far. Do you have any reference pics of what the real thing looks like?
	__________________ Meurig3d.co.uk

23rd November 2011, 03:49 AM	#3
digitalillusion Registered Member Join Date: Feb 2011 Location: Poland Posts: 18	Thx. Yes, I do have one's But be careful in comparing because it has served in the armies of the world to the 60s of the 20th century
	__________________ Problem Exists Between Keyboard And Chair

23rd November 2011, 09:24 AM	#4
Starbase1 Contributing Member Join Date: Dec 2007 Location: London Posts: 8,176	Another detail loving military modeller I see! Great work so far!
	__________________ *"I'm completely operational and all my circuits are functioning perfectly."* - - - - - - My page on the International Space Art Network: http://spaceart1.ning.com/profile/NickStevens.

17th December 2011, 03:05 PM	#5
digitalillusion Registered Member Join Date: Feb 2011 Location: Poland Posts: 18	Small update. Attached Thumbnails
	__________________ Problem Exists Between Keyboard And Chair

17th December 2011, 05:03 PM	#6
Rigel Moderator Join Date: Nov 2007 Location: London (the other one, in Canada) Posts: 17,485	That looks great.
	__________________ Those who say it can't be done, should stop interrupting those of us who are busy doing it! ------------------------------------------------------------ Other Projects The Universal Joint Beechcraft 2000 airplane LadyBug (Firefly class freighter)

17th December 2011, 08:20 PM	#7
BillS Administrator Join Date: Aug 2006 Location: Belleville, Ontario Posts: 10,347	Holy detailicious batman!
	__________________ Bill. aka LemmingDude. aka Ethangar, Ethanger, Ethengar, Ethenger, Ethan, Eth, ehenger, etharger, Ethel, Ehtangar, Ethanfar, hanger, Eclangers, Ethand, ethang, hangar, Ethanol, Ethangix, Ethangod, Eggnog, Ethanprop........ Lemming World

17th December 2011, 11:25 PM	#8
DELTA Contributing Member Join Date: Nov 2007 Location: Remember those who gave all for your freedoms. Posts: 3,797	Watching this one...
	__________________ Great modelers make mistakes, they just never post them!!! The level of my modeling and rendering skills depend largely on my motivational level... Obi-Wan Kenobi waves his hand in front of J.J. Abrams and says. "This is not the Enterprise they were looking for..."

18th December 2011, 08:08 AM	#9
JackN Moderator Join Date: Dec 2007 Location: Sparta, TN Posts: 2,966	Another entry for the Welds and Dimples category!
	__________________ Lightwave 8.3 PsychoBabyl.com My Deviant Page

20th December 2011, 02:16 PM	#11
digitalillusion Registered Member Join Date: Feb 2011 Location: Poland Posts: 18	Thx m8. That's a noise mostly. And a few is meshes.
	__________________ Problem Exists Between Keyboard And Chair

20th January 2012, 02:23 PM	#12
digitalillusion Registered Member Join Date: Feb 2011 Location: Poland Posts: 18	A face of... Attached Thumbnails
	__________________ Problem Exists Between Keyboard And Chair

20th January 2012, 02:41 PM	#13
3D_CG Contributing Member Join Date: Jan 2008 Location: Spokane Washington, North Side in a quiet neighbor hood, Tell I start My Harley, Then its NOISY... Posts: 4,071	wow.... How did u do the welds. impressive.. nice gun dude....
	__________________ "Remember The Vets who fought for our Freedom" ... Intel I7 980 OC'D to 5.1 GHZ, Water Cooled, Gigabyte MB 32 gig ram, 5 HD's, GTX 560 Ti (x 2) LightWave 11.5, 32 and 64 bit

20th January 2012, 08:47 PM	#14
JimCrafton Registered Member Join Date: Sep 2009 Posts: 1,020	Please tell me you modeled all those welds Looks great!
	__________________ Houdini Models Modo models

25th January 2012, 07:39 AM	#15
digitalillusion Registered Member Join Date: Feb 2011 Location: Poland Posts: 18	Thx m8. 2 of welds are meshes (near an exhausts). The rest of them are noise.
	__________________ Problem Exists Between Keyboard And Chair

15th April 2012, 12:56 PM	#16
digitalillusion Registered Member Join Date: Feb 2011 Location: Poland Posts: 18	The End of modeling. Attached Thumbnails
	__________________ Problem Exists Between Keyboard And Chair

15th April 2012, 05:04 PM	#17
Rigel Moderator Join Date: Nov 2007 Location: London (the other one, in Canada) Posts: 17,485	Very nice. It has spec, which doesn't happen with military paint (at least, not the paint the Canadian Armed Forces uses). But it is a very superb model.
	__________________ Those who say it can't be done, should stop interrupting those of us who are busy doing it! ------------------------------------------------------------ Other Projects The Universal Joint Beechcraft 2000 airplane LadyBug (Firefly class freighter)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode